FRY 1/4 Series Air Preparation Units
Home Page > Pneumatic > Air Preparation Units > FRY Series Air Preparation Units > FRY 1/4 Series Air Preparation Units > 

FRY 1/4 Series Air Preparation Units


FRY 1/4 Series Air Preparation Units

Specifications
» G 1/4" air inlet outlet ports
» Light and compact design
» High flow rate and efficiency
» Precision pressure adjustment
» Semi-automatic drain
» Long life

Technical Specifications
Technical Specifications of F 1/4" Filter

Standards: ISO 5782 Filter standard
Operating Pressure: 0 - 16 Bar 
Operating Temperature: 0 °C to +50 °C (at 10 bar)
Filtration Value: 30 µm 
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method:  Semi-automatic
Test: Operating test is applied in compliance with MAG standards and ISO 5782 standard before delivering to each filter. 

Technical Specifications of R 1/4" Regulator

Standards: 
ISO 6953 Regulator standard

Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 8 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0 °C to +60 °C (at 10 bar)
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow Rate: 550 L/min
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each regulator.

Technical Specifications of Y 1/4" Lubricator

Standards:
ISO 6301 Lubricator standard
ISO VG 32 Class MAG special air preparation unit lubricator should be used.
Operating Pressure: 0 - 16 Bar 
Operating Temperature: -20 °C to +50 °C (at 10 bar) 
Air-Oil Mixing Ratio: can be adjusted with adjusting screw
Flow rate: 550 L/min
Flow rate range: 0.2 … 30 m3/h
Test: Operating test is applied in compliance with MAG standards and ISO 6301 standard before delivering to each lubricator
Technical Specifications of FR 1/4" Filter + Regulator

Standards: 
ISO 6953 Regulator and Filter + Regulator Standard
Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 10 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0°C to +50 °C (at 10 bar)
Filtration Value: 30 µm
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method: Semi-automatic 
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each filter + regulator.

Warranty and Service:
MAG FRY series conditioners are under the warranty of our company for 2 years against manufacturing defects. Also, service and spare part support is provided for 10 years. 
Service and repair activities must be performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled. 

FRY 1/4 Series Air Preparation Units
Home Page > Pneumatic > Air Preparation Units > FRY Series Air Preparation Units > FRY 1/4 Series Air Preparation Units > 

FRY 1/4 Series Air Preparation Units


FRY 1/4 Series Air Preparation Units

Specifications
» G 1/4" air inlet outlet ports
» Light and compact design
» High flow rate and efficiency
» Precision pressure adjustment
» Semi-automatic drain
» Long life

Technical Specifications
Technical Specifications of F 1/4" Filter

Standards: ISO 5782 Filter standard
Operating Pressure: 0 - 16 Bar 
Operating Temperature: 0 °C to +50 °C (at 10 bar)
Filtration Value: 30 µm 
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method:  Semi-automatic
Test: Operating test is applied in compliance with MAG standards and ISO 5782 standard before delivering to each filter. 

Technical Specifications of R 1/4" Regulator

Standards: 
ISO 6953 Regulator standard

Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 8 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0 °C to +60 °C (at 10 bar)
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow Rate: 550 L/min
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each regulator.

Technical Specifications of Y 1/4" Lubricator

Standards:
ISO 6301 Lubricator standard
ISO VG 32 Class MAG special air preparation unit lubricator should be used.
Operating Pressure: 0 - 16 Bar 
Operating Temperature: -20 °C to +50 °C (at 10 bar) 
Air-Oil Mixing Ratio: can be adjusted with adjusting screw
Flow rate: 550 L/min
Flow rate range: 0.2 … 30 m3/h
Test: Operating test is applied in compliance with MAG standards and ISO 6301 standard before delivering to each lubricator
Technical Specifications of FR 1/4" Filter + Regulator

Standards: 
ISO 6953 Regulator and Filter + Regulator Standard
Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 10 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0°C to +50 °C (at 10 bar)
Filtration Value: 30 µm
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method: Semi-automatic 
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each filter + regulator.

Warranty and Service:
MAG FRY series conditioners are under the warranty of our company for 2 years against manufacturing defects. Also, service and spare part support is provided for 10 years. 
Service and repair activities must be performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled. 

FRY 1/4 Series Air Preparation Units
Home Page > Pneumatic > Air Preparation Units > FRY Series Air Preparation Units > FRY 1/4 Series Air Preparation Units > 

FRY 1/4 Series Air Preparation Units


FRY 1/4 Series Air Preparation Units

Specifications
» G 1/4" air inlet outlet ports
» Light and compact design
» High flow rate and efficiency
» Precision pressure adjustment
» Semi-automatic drain
» Long life

Technical Specifications
Technical Specifications of F 1/4" Filter

Standards: ISO 5782 Filter standard
Operating Pressure: 0 - 16 Bar 
Operating Temperature: 0 °C to +50 °C (at 10 bar)
Filtration Value: 30 µm 
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method:  Semi-automatic
Test: Operating test is applied in compliance with MAG standards and ISO 5782 standard before delivering to each filter. 

Technical Specifications of R 1/4" Regulator

Standards: 
ISO 6953 Regulator standard

Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 8 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0 °C to +60 °C (at 10 bar)
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow Rate: 550 L/min
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each regulator.

Technical Specifications of Y 1/4" Lubricator

Standards:
ISO 6301 Lubricator standard
ISO VG 32 Class MAG special air preparation unit lubricator should be used.
Operating Pressure: 0 - 16 Bar 
Operating Temperature: -20 °C to +50 °C (at 10 bar) 
Air-Oil Mixing Ratio: can be adjusted with adjusting screw
Flow rate: 550 L/min
Flow rate range: 0.2 … 30 m3/h
Test: Operating test is applied in compliance with MAG standards and ISO 6301 standard before delivering to each lubricator
Technical Specifications of FR 1/4" Filter + Regulator

Standards: 
ISO 6953 Regulator and Filter + Regulator Standard
Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 10 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0°C to +50 °C (at 10 bar)
Filtration Value: 30 µm
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method: Semi-automatic 
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each filter + regulator.

Warranty and Service:
MAG FRY series conditioners are under the warranty of our company for 2 years against manufacturing defects. Also, service and spare part support is provided for 10 years. 
Service and repair activities must be performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled. 

FRY 1/4 Series Air Preparation Units
Home Page > Pneumatic > Air Preparation Units > FRY Series Air Preparation Units > FRY 1/4 Series Air Preparation Units > 

FRY 1/4 Series Air Preparation Units


FRY 1/4 Series Air Preparation Units

Specifications
» G 1/4" air inlet outlet ports
» Light and compact design
» High flow rate and efficiency
» Precision pressure adjustment
» Semi-automatic drain
» Long life

Technical Specifications
Technical Specifications of F 1/4" Filter

Standards: ISO 5782 Filter standard
Operating Pressure: 0 - 16 Bar 
Operating Temperature: 0 °C to +50 °C (at 10 bar)
Filtration Value: 30 µm 
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method:  Semi-automatic
Test: Operating test is applied in compliance with MAG standards and ISO 5782 standard before delivering to each filter. 

Technical Specifications of R 1/4" Regulator

Standards: 
ISO 6953 Regulator standard

Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 8 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0 °C to +60 °C (at 10 bar)
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow Rate: 550 L/min
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each regulator.

Technical Specifications of Y 1/4" Lubricator

Standards:
ISO 6301 Lubricator standard
ISO VG 32 Class MAG special air preparation unit lubricator should be used.
Operating Pressure: 0 - 16 Bar 
Operating Temperature: -20 °C to +50 °C (at 10 bar) 
Air-Oil Mixing Ratio: can be adjusted with adjusting screw
Flow rate: 550 L/min
Flow rate range: 0.2 … 30 m3/h
Test: Operating test is applied in compliance with MAG standards and ISO 6301 standard before delivering to each lubricator
Technical Specifications of FR 1/4" Filter + Regulator

Standards: 
ISO 6953 Regulator and Filter + Regulator Standard
Inlet Pressure: 0 - 16 Bar
Outlet Pressure: 0.5 - 10 Bar; optionally 0.5 - 4 and 0.5 - 16 bar 
Operating Temperature: 0°C to +50 °C (at 10 bar)
Filtration Value: 30 µm
Minimum Pressure Difference: P1 - P2 = 0.2 bar
Flow rate: 550 L/min
Efficiency: 95%
Discharge Method: Semi-automatic 
Test: Operating test is applied in compliance with MAG standards and ISO 6953 standard before delivering to each filter + regulator.

Warranty and Service:
MAG FRY series conditioners are under the warranty of our company for 2 years against manufacturing defects. Also, service and spare part support is provided for 10 years. 
Service and repair activities must be performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.